Himgiri Logo
Back to Products

Installation Guide

BWR & Marine Grade Plywood Installation

1. Surface Preparation

Ensure the installation surface is clean, dry, and level. Remove any debris, dust, or old materials. For wall installations, locate and mark the studs.

2. Cutting the Plywood

Use appropriate cutting tools (circular saw, table saw) with fine-toothed blades. Always measure twice and cut once. Leave 1/8 inch gap between panels for expansion.

3. Fastening

Use appropriate screws or nails based on application. For walls, secure to studs every 6-8 inches. For flooring, secure every 6 inches along edges and 12 inches in field.

4. Edge Treatment

Seal all edges with appropriate treatment based on application. For marine applications, use marine-grade sealant.

Block Board Installation

1. Preparation

Acclimatize the block board in installation area for 24-48 hours. Check moisture content should be below 12%.

2. Framework

Ensure supporting framework is sturdy and level. Maximum support spacing should be 16 inches center to center.

3. Installation

Use appropriate adhesive and mechanical fasteners. Start from one corner and work systematically. Maintain proper alignment throughout.

Shuttering Plywood Usage

1. Form Preparation

Clean the shuttering plywood thoroughly. Apply release agent evenly on the surface that will contact concrete.

2. Assembly

Ensure proper bracing and support. Maximum spacing between supports should not exceed manufacturer specifications.

3. Maintenance

Clean thoroughly after each use. Store in dry conditions. Inspect for damage before reuse.

Interior Solutions Installation

1. Veneer Installation

Use appropriate adhesive. Apply pressure uniformly. Allow proper curing time. Finish with recommended sealers.

2. Wallpaper Application

Prepare walls properly. Use recommended adhesive. Align patterns carefully. Remove air bubbles during application.

3. Flooring Installation

Ensure subfloor is level and dry. Use recommended underlayment. Follow manufacturer's spacing guidelines.

Need professional installation? Contact our expert team for assistance.